PG92ESAA36060A Payne – 92% AFUE Single-Stage 60000 Btuh ECM Condensing Gas Furnace

$1,138.82

PG92ESAA36060A Payne – 92% AFUE Single-Stage 60000 Btuh ECM Condensing Gas Furnace

SKU: PG92ESAA36060A Categories: , Tag:

Description

Payne┬« PG92ESAA36060A – 92% AFUE Single-Stage 60000 Btuh ECM Condensing Gas Furnace

The PG92ESA Multipoise Condensing Gas Furnace features single-stage gas valve and ECM blower motor. This furnace provides electrical efficiency with a fixed-speeds, constant torque (FCT) ECM blower motor. With an Annual Fuel Utilization Efficiency (AFUE) of 92.1%, the single-stage gas furnace provides added savings over standard, non-condensing gas furnaces. This Gas Furnace features 4-way multipoise installation flexibility, and is available in eight model sizes. The PG92ESA can be vented for direct vent/two-pipe, ventilated combustion air, or single-pipe applications. Low NOx units are designed for California installations and meet 40 ng/J NOx emissions. Can be installed in air quality management districts with a 40 ng/J NOx emissions requirement. All sizes are design certified in Canada. All sizes are design certified for use in Manufactured Housing (Mobile Home) applications when used with factory-approved MH accessory kit.

PERFORMANCE

  • Fixed-speeds, constant torque (FCT) ECM blower motor for electrically efficient operation all year long in heating, cooling and continuous fan operation
  • Single-speed inducer motor, and single-stage gas valve
  • Silicon Nitride Robust Hot Surface Igniter.
  • Adjustable blower speed for heating and cooling.
  • Aluminized-steel primary heat exchanger.
  • Stainless-steel condensing secondary heat exchanger.

INSTALLATION FLEXIBILITY

  • 4-way multipoise design for upflow, downflow or horizontal installation, with unique vent elbow for 12 different venting options, including optional venting through-the-cabinet downflow venting capability.
  • Factory-configured ready for upflow applications.
  • Ideal height 35″ (889 mm) cabinet: short enough for taller coils, but still allows enough room for service.
  • Direct-vent/sealed combustion, single-pipe venting or ventilated combustion air.

APPLICATIONS

  • Approved for Manufactured Housing/Mobile Home applications with MH accessory kit.
  • Propane convertible with gas conversion accessory.

CERTIFICATIONS

  • All sizes meet ENERGY STAR┬« South regional standards.
  • Cabinet air leakage less than 2.0% at 1.0 in. W.C. and cabinet air leakage less than 1.4% at 0.5 in. W.C. when tested in accordance with ASHRAE standard 193.
  • All sizes meet 40 ng/J NOx emissions. Can be installed in air quality management districts with a 40 ng/J NOx emissions requirement
Specifications
Weight 122 Pounds (lbs)
Width 14.2 Inches (In)
Height 35 Inches (In)
Country of Origin USA
Length 29.5 Inches (In)
AFUE 92%
Air Flow Multi-Position
Blower Motor HP 1/2 HP
Blower Motor RPM 600-1200
Blower Motor Speeds 5 (Five)
Blower Motor Type ECM (Electronically Commutated Motor)
Blower Wheel 11″ x 7″
Brand Payne
BTU Input 60000
BTU Output 56000
CFM 1100
Circuit Breaker – Max Amps 15
Color Gray
Cycle/Hertz 60 Hz
Energy Star Rated No
ETL Listed No
FER Compliant Yes
Fuel Type Natural Gas or LP
Full Load Amps 6.4
Gas Connection 1/2″ [12.7 mm] N.P.T.
Ignition Type Silicon Nitride
Includes Filter Rack No
Phase Single
Product Family PG92ESA
Prop 65 Yes
Stage Single
UL Listed No
Voltage 115 VAC
Warranty Offered Yes

Additional information

Weight 122 lbs
Dimensions 29.5 × 14.2 × 35 in